CYTIMER - 2000

INTRODUCTION
 
This is a crystal controlled universal timer. It provides a precise cycle time in a range of 0.1 seconds to 999 minutes. It incorporates an output relay for the indication of the end of cycle time. The “ON” time of relay is programmable. It has an option of auto or manual reset and an UP counting or DOWN counting mode of operation.
CyTimer-2000
 

FEATURES
  • Micro-controller based crystal controlled timer.
  • Relay output with programmable ON time.
  • Flush type panel mounting with ½ DIN cut-out.
  • User selectable UP or DOWN counting operation.
  • Programmable Auto / Manual reset.
  • Three digit display to read the elapsed time.
  • Membrane keyboard for programming and operating the timer.
  • Relay status indication.
 

TECHNICAL SPECIFICATIONS
DISPLAY

  • Three digit 0.3” red display for elapsed time.

  • Parameter indication.

  • Relay status indication.

KEYBOARD

Membrane keyboard for programming and operating the timer.

INPUT

Potential free input for Start / Manual reset.

Output

SPDT relay rated at 230VAC ; 0.5A ( non-inductive load ).

GENERAL
Power supply 240 V AC ± 10%, 5Hz.
Ambient 0°C  to  45°C.
Power consumption 3 VA.
PHYSICAL

Case

 Aluminum extruded powder coated body with plastic die-cast bezel.
Terminals Barrier screw type. Can accept up-to 2.5mm wire.
Bezel Size 96 x 48 mm.
Depth 130mm.
Panel cut-out 92 x 44 mm.
 

RANGES
  • User selected ranges.

    a. 0.1 to 99.9 seconds.
    b. 0.1 to 99.9 seconds.
    c. 1 to 999 seconds.
    d. 1 to 999 seconds.

  • User programmable UP/DOWN counting.
  • User programmable relay ON time from 0.1 to 99.9 seconds.
 

APPLICATIONS

  • Perfect sequencing of process.

  • Material handling and batching.

  • Auto recycling.